Index
GFK-2571A Index-1
A
ACTIVE LED, 1-7, 2-11
Alarm CR, 4-3
Application relationship (AR), 1-16, 4-2
Autonegotiation, 1-9, 2-6
B
Backplane knockout, 2-3
Basic System, 1-10
Broadcast, 1-16
C
Cable
Ethernet, 2-6
Coherency, 4-9
Command Line Interface, 3-4
Communication relationship (CR), 1-16, 4-
3
CONFIG LED, 1-7, 2-10
Configuration
overview, 3-2
tools, 3-4
update rate, 4-10
Controls and Indicators, 1-5
CPU Node, 1-16
D
DAP, 1-16
Data coherency, 4-9
DCP. See Discovery and Configuration
Protocol
Description, 1-2
Device Name, 3-4
Disabling Media Redundancy, 6-8
Discovery and Configuration Protocol, 3-
28, 5-21
DO I/O for Remote IO Modules, 4-13
Documentation, 1-1
Duplicate controller IP addresses, 4-7
Duplicate device IP addresses, 4-6
E
Enabling Media Redundancy, 6-7
Ethernet connections, 2-6
F
Fatal error reporting, 5-7
Fault contacts, 5-7
Fault locating references, 5-7
Faults
reported to the RX3i Controller fault table,
5-16
reported to the RX3i I/O fault table, 5-18
Firmware Update Mode, 5-4
Firmware updates, 2-13
G
Gateway, 3-4
configuration, 3-12
Glossary, 1-16
Gratuitous ARPs, 1-16
GSDML, 1-11, 1-16
GSDML file
configuration, 3-22
VersaMax PROFINET Scanner, 3-16
H
Hardware Watchdog Timer, 5-3
Hazardous locations, 2-2
Heat sink, 2-3
Hot insertion and removal, 2-5
I
I/O scanning, 4-8
Inputs default, 4-14
Installation, 2-4
IO CRs, 4-3
IO Devices, 1-9
IOC, 1-16
IOCR, 1-16
IOCS, 1-16
IOD, 1-16
IO-Devices
per PROFINET Controller, 1-8
per RX3i CPU Node, 1-8
properties, 3-26
IOPS, 1-16
IP address, 1-3
IP Address, 3-4
configuration, 3-11
To Next Page
Loading...
