THE PROBLEM SOLVER
(continued)
PROBLEM
OVEN WILL NOT
SELF-CLEAN
OVEN
DC)OR
WON’T LATCH
OVEN TEMPERATURE
TOO HOT
OR
TOO COLD
POSSIBLE CAUSE
.
#mtornatic
timer dials not set or not set properly. The clock must be
set
to time
of day and the STOP TIME dial must be set and advanced beyond the time
noted
on
oven
clock.
●
The STOP TIME dial was not advanced for long enough.
●
Both the OVEN SET
and
the OVEN TEMP knobs must be
set
at
the
CLEAN setting.
c
During the self-cleaning function, a thick pile of
spillover
in
the oven can
leave a heavy
layer
of ash that can insulate the area from further heat.
●
The
door
latch handle not moved all the way to the right.
. Oven may
be
too hot from previous use. Open oven door to cool oven. When
oven has cooled, latch handle can again be moved.
●
OVEN SET knob must be at CLEAN or OFF before
latch
handle can be moved.
●
Oven thermostat needs adjustment. See the Adjust the Oven
Thermostat–
Do
It
YourseZfsection.
If you need more help... call, toll free:
GE Answer
Center@
800.626.2000
consumer information service
34
To Next Page
Loading...
