GE JBP80 - Using the clock and timer.; Clock and Timer Operations

SURFACE CONTROLS
(continued)
Dual Surface Unit Switch (Glass Cooktops Only)
The right front surface unit has
2 cooking sizes to select from so
you
can match the size of the unit
to the size of the cookware you
are using.
CIED
00
To use the large (9 inch) surface
unit, push in the right portion of
the COIL SIZE switch next to the
control knob.
To use the small (6 inch) surface
unit, push in the left portion of the
COIL SIZE switch,
6“
9“
Hot Surface Indicator Light (Glass Cooktops only)
A “HOT SURFACE” light will glow brightly when
any halogen/radiant element is turned on, and will
remain lit after the unit is
turrmd off until the surface
is cool enough
to touch. Each element has its own
“HOT SURFACE” indicator light.
.
It comes on instantly when the unit is turned on.
“ [t stays on even after the unit is turned off.
● It glows brightly until the unit is safe to touch.
SURFACE COOKWARE TIPS
(Electric Coil models only)
Cookware
Use medium- or heavy-weight cookware. Aluminum
RIGHT
cookware conducts heat faster than other metals.
Cast-iron and coated cast-iron cookware are slow to
absorb heat, but generally cook evenly at low to
medium heat settings. Steel pans
mayr cook unevenly
if not combined with other metals.
-1
For best cooking results pans should be ilat on the
bottom. Match the size
of the saucepan to the size of
Not over 1 inch
the surface unit. The pan should not extend o~rer the
edge of the surface unit more than 1 inch.
WRONG
Over 1 inch
14