EasyManua.ls Logo

GE JBP82 - Glass Cooktop Cleaning; Daily Glass Cooktop Cleaning; Removing Burned-On Residue; Removing Heavy Burned-On Residue

GE JBP82
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaningtheglasscooktop. GEAppliances.com
Cleanyourcooktopafter
eachspill. Use CERAMA
BRYTE®CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEI,bMVlABRYI_ ®Ceramic
Cookmp Cleaner on the glass cooktop.
Other creams may not be as effbctive.
To maintain and protect the surface of
your glass cooktop, follow these steps:
[]
Before using the cooktop for the
first time, clean it with CERAMA
BRYI_£ ®Ceramic Cooktop Cleanen
_12qishelps protect the top and
makes clean-up easiel:
[] Daily use of CERAMA BRYFE®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
[]
[]
[]
Shake the cleaning cream well.
Apply a few drops of CEI_dvIA
BRYFE®Ceramic Cooktop Cleaner
directly to the cooktop.
Use a paper towel or C£R_MA
BRYFE®Cleaning Pad for Ceramic
Cookmt_ to clean the entire
cooktop surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is veryimportantthat youDONOT
heatthecooktopuntil it hasbeencleaned
thoroughl_
Use a CERAMA BRYTE®Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite _ Multi-Purpose No
Scratch blue scrub pad.
Burned-On Residue
WARNING:DAMAGEto yourglasssurface
mayoccurif youusescrubpadsother than the
pad includedwith yourrange.
[] Allow the cooktop to cool.
[] Spread a few drops of CE_XMA
BR¥£E ®Ceramic Cooktop Cleaner
on the entire burned residue area.
[] Using the included CERAMA
BRYFE®Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
[] If any residue remains, repeat the
steps listed above as needed.
[] For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BR¥£E ®Ceramic Cooktop Cleaner
and a paper towel.
The CERAMABRYTE_ Ceramic
Cooktop Scraper and aft
recommended supplies are
available through our Parts Centec
See instructions under "To Order
Parts" section on next page,
NOTE:Do not use a duff or
nicked blade.
Heavy, Burned-On Residue
[] Allow the cooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure to
the razor scraper in order to
remove the residue.
[]
_ter scraping with the razor
scrapm; spread a few drops of
CER_MA BRYFE®Ceramic
Cooktop Cleaner on the entire
burned residue area. Use the
CER?OJA BRYFE®Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
after all residue has been
removed, polish the entire
surface with CER?OJA BRYFE®
Ceramic Cooktop Cleaner
and a paper towel.
25

Related product manuals