Using the clock and timer, consomemode s
Not all features are on all models.
@
@
Make sure the clock s set to the
correct time of day.
To Set the Clock
The clock must be set to the correct time of day
for the automatic oven timing functions to work
properly.The time of day cannot be changed
during a timed baking or self-cleaning cycle.
[7] Touchthe CLOCKpad twice.
[] Touchthe + or - pads.
If the + or - pads are not touched within one
minute after you touch the CLOCKpad, the
display reverts to the original setting. Ifthis
happens, touch the CLOCKpad and reenter
the time of day.
[] Touch the START/ONpad until the time of
day shows in the display.This enters the
time and starts the clock.
Tocheckthe time of day when the display
isshowing other information, simply touch
the CLOCKpad.Thetime of day shows until
another pad istouched.
To Turn OFFthe Clock Display
Ifyou have several clocks in your kitchen,you
may wish to turn off the time of day clock
display on your range.
Ffl
Touchthe CLOCKpad once to turn off the
time of day display.Although you will not
be able to see it, the clock maintains the
correct time of day.
Touch the CLOCKpad again to recall the
clock display.
The timer is a minute timer only.
The CLEAR/OFFpad does not
affect the timer.
To Set the Timer
Thetimer does not control oven operations.The
maximum setting on the timer is9 hours
and 59 minutes.
[]
Touch the KITCHEN TIMER ON/OFF or
TIMER ON/OFF pad.
Touchthe + or - pads until the amount of
time you want shows in the display. The
maximum time that can be entered in
minutes is59.Times more than 59
minutes should be changed to hours and
minutes.
If you make a mistake, touch the KITCHEN
TIMER ON/OFF or TIMER ON/OFF pad and
begin again.
@
[]
Touch the START/ONpad. The time will
start counting down, although the display
does not change until one minute has
passed.
When the timer reaches :00, the control
will beep 3 times followed by one beep
every 6 seconds until the KITCHENTIMER
ON/OFFor TIMERON/OFF pad istouched.
14
To Next Page
Loading...
