26
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Special features of your oven control.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, touch the
START pad.
Touch the CLOCK pad again to change
to the 24 hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
Using Auto Recipe
™
Conversion
When using convection bake, the Auto Recipe
™
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
This feature is activated so the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F (177°C) and touch
the START pad, the display will show CON
and the converted temperature of 325°F (163°C).
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
To deactivate the feature:
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the CONVECTION BAKE
MULTI/1 GRILLE pad. The display
will show CON ON. Touch the
CONVECTION BAKE MULTI/1 GRILLE
pad again. The display will show
CON OFF.
Touch the START pad.
To reactivate the feature, repeat steps 1–3
above but touch the START pad when
CON ON is in the display.
To Next Page
Loading...
Need help?
General
