EasyManua.ls Logo

GE JS998 Series - High Limit Thermal One-Shot TCO; Self-Clean Latch Motor

GE JS998 Series
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 23 –
TCO
Convection Fan
Convection Fan
EMI Board
TCO
Slide-In Range
Single and Upper Double Wall Ovens
High Limit Thermal One-Shot TCO
The high limit thermal one-shot TCO is located on
the rear of the oven behind the center cover and is
wired in series with L2 from the terminal block.
These thermal switches are a non-resettable
device and will open at 302°F, indicating a
thermal runaway condition.
If tripped, the oven must be removed from
installation in order for the one-shot TCO to be
replaced.
Cause of overheating should be determined
before replacing the TCO.
Self-Clean Latch Motor
To remove the self-clean latch motor assembly,
remove the two
1
/4-in. hex head screws.
Motor
1
2
1 - Unlock Switch
Blue and yellow wires.
Reads closed when the door is unlocked.
2 - Lock Switch
Orange and yellow wires
Reads infinity when the door is unlocked.
Hex Head Screws

Related product manuals