GE JTP26 Use And Care Guide

( .k
To Set the Clock
The clock must be set for the
automatic oven timing functions to
work properly. The time of
day
cannot be changed during a Timed
❑
1. Press the
2. Press the INCREASE or
CLOCK pad. DECREASE pad to set the time
CLOCK
A
of day.
Baking or Self-Cleaning cycle.
Timer
To Set the Timer
The timer does not control oven
1. Press the TIMER ON/OFF pad.
operations. The maximum setting
2. Press the INCREASE or
on the timer is 9 hours and 55
DECREASE pad to set the
minutes.
amount of time on the timer.
The timer will start automatically
within a few seconds of releasing the
INCREASE or DECREASE pad.
The timer, as you are setting it,
will display seconds until 1 minute
is reached.
Then it will display minutes
and seconds until 10 minutes
is reached.
After 10 minutes, it will display
minutes only until 59 minutes
is reached.
After 59 minutes, it will display
hours and minutes
(“HR” now
appears in the display) until the
maximum time of 9 hours and
55 minutes is reached.
T Reset the Timer
To Cancel the Timer
11 I’IMER” is displayed, press the INCREASE or Press and hold the TIMER ON/OFF pad until the
DECREASE pad until the desired time is reached. word “TIMER” disappears from the display.
If “TIMER” is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions
above to set the timer.
End of Cycle Tones Display Messages
The end of cycle tone is 3 short beeps followed by If “door” appears in the display, the door is not
1 beep that repeats every 6 seconds until you press closed. If “LOCK” appears in the display, the oven
any operation. If you would like to eliminate the door is in the locked position. BAKE, BROIL and
repeating beeps, press
and hold the CLEAR/OFF pad
COOK TIME cannot be set if the door is in the
for 10 seconds. locked position.
To return the signal that beeps every 6 seconds, press
and hold the
CLEAWOFF pad for 10 seconds.
Power Outage
After a power outage, when power is restored, the display will flash and the
time shown will no longer be correct—for example, after a 5-minute power
interruption the
clock will be 5 minutes slow. The display flashes until the
clock is reset. All other functions that were in operation when the power
~ out will have to be programmed again.
7

GE JTP26 Specifications

General

Brand	GE
Model	JTP26
Category	Oven
Language	English