GE JTP26 Use And Care Guide

USING YOUR OVEN
Before Using the Oven
1. Look at the controls. Be sure you understand how to
set them properly. Read over the directions for the
Oven Controls so you understand how to use them.
2. Check the oven interior. Look at the shelves.
Take
a practice run at removing and replacing them
properly,
[o give sure, sturdy support.
3. Read over the information
and tips that follow.
4. Keep this guide handy so you can refer to it,
especially during the first weeks of using your
new oven.
Your oven temperature is controlled very accurately
using an oven control system. We recommend that you
operate the oven for a number of weeks using the time
given on recipes as a guide to become familiar with
your new oven’s performance. If you think an
adjustment is necessary, see the Adjust the Oven
Thermostat section. It gives easy D() It H)ur.Ye/f
instructions on how to adjust the thermostat.
NOTE:
● A fan may automatically turn on and off (o cool
internal parts. This is normal, and the fan may
continue to run even after the oven is turned off.
● You may notice a “burning” or “oily” smel I the first
few times you turn your oven on. This is normal in a
new oven and will disappear in a short time. To speed
the process, set a self-clean cycle for
a minimum of
3 hours. See the Operating the Self-Cleaning Oven
section.
● When the oven gets hot, the top and outside surfaces
of the oven get hot too.
Oven Light
Both lights come on when the upper oven door is
-
opened or when the control panel light switch is
turned on.
NOTE: The bottom oven does not have its own light
switch. It operates by opening the upper oven door or
by using the control panel light switch.
—
8

GE JTP26 Specifications

General

Brand	GE
Model	JTP26
Category	Oven
Language	English