GE LOGIQ e R4 Series - Error Logs Tab

GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Chapter 5 Components and Functions (Theory) 5-13
5-4-4 Error Logs Tab
From the Error Logs Tab the Log Viewer displays four categories with pull-down sub-menus and an Exit
selection. The Service Interface allows scanner logs to be viewed by all service users.
The log entries are color-coded to identify the error level severity at a glance.
The Service Interface supports the transfer of these logs to local destinations such as the CD-ROM
drive.
Table 5-3 Log Entry Key
Severity Error Level Color Code
1
Information
Green
2
Warning
Blue
3
Error
Red
Figure 5-11 Log Viewer / Logs / Log Entries