GE LOGIQ e R4 Series - Electrical Specifications

GE
Direction 5370626-100, Revision 16 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
3-14 Section 3-6 - System Configuration
3-6-1-3 How to identify old LCD and new LCD
• Identify LCD type from the appearance of Ultrasound System.
3-6-2 Electrical Specifications
Figure 3-11 Difference between Old LCD and New LCD
Table 3-6 Electrical Specifications for LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e
Adapter Voltage Tolerances Current Frequency
TWADP100 100-240 VAC +/-10% 1.3A (max) 50/60Hz
new LCD
old LCD
new LCD
old LCD
new LCD
old LCD