GE
Direction 5370626-100, Revision18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Chapter 1 - Introduction 1-9
1-2-3 Product Icons
The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-16 Warnings
LABEL/SYMBOL PURPOSE/MEANING LOCATION
Identification and Rating Plate • Manufacture’s name and address
• Date of manufacture
• Model and serial numbers
• Electrical ratings (Volts, Amps, phase,
and frequency)
Bottom panel of the console
Type/Class Label Used to indicate the degree of safety or
protection.
Bottom panel of the adapter.
IP Code (IPX1 or IPX8)
IPX1: FSU-2001
IPX8: MKF 2-MED GP26, FSU-1000
Indicates the degree of protection
provided by the enclosure per IEC60
529. IPX1 cannot be used in operating
room environment;
IPX8 can be used in operating room
environment.
Bottom of Footswitch
Authorized European Representative
address
Bottom panel
United States only Prescription
Requirement label
Bottom panel
Equipment Type BF (man in the box
symbol) IEC 878-02-03 indicates B
Type equipment having a floating
applied part.
Probe connectors
General Warning. Various
“CAUTION - Dangerous voltage” (the
lightning flash with arrowhead in
equilateral triangle) is used to indicate
electric shock hazards.
Various
To Next Page
Loading...
