My Trainer
LOGIQ V3/V5/V5 Expert – Basic Service Manual 4-47
5726264-100 English Rev.8
4-6 My Trainer
4-6-1 Overview
My Trainer provides a quick guide to operate the system.
To access My Trainer,
1. Press Alt + H to enter My Trainer.
Or,
Press Utility -> System -> User Configurable Key. Check
Enable, then set My Trainer in the Keyboard Key or User
Defined Key.
Figure 4-23. Set My Trainer
2. Press defined key to access My Trainer.
There are four sections in My Trainer. The four sections are
displayed on the left side of the My Trainer interface.
To Next Page
Loading...
