Safety considerations
LOGIQ V3/V5/V5 Expert – Basic Service Manual 1-23
5726264-100 English Rev.8
1-6-5-2 Probes
Follow these guidelines before connecting a probe to the
Ultrasound system:
• Inspect the probe prior to each use for damage or
degradation to the:
• housing
• cable strain relief
• lens
• seal
• connector pins
• locking mechanism
• Do not use a damaged or defective probe.
• Never immerse the probe connector or adapter into any
liquid.
• The system has more than one type of probe port. Use the
appropriate probe port designed for the probe you are
connecting.
1-6-5-3 Peripherals
Refer to the Patient Safety Environment section of the User’s
Manual for peripheral isolation information.
To Next Page
Loading...
