C.9
M-PACT Plus
Dimensional drawings
A
B
C
X
Rear access connection
Withdrawable pattern
Type S, N - 3 pole - Frame size 2, In=3200A
Type H - 3 pole- Frame size 2, In=800A to 3200A
Type S, N - 4 pole - Frame size 2, In=3200A
Type H - 4 pole - Frame size 2, In=800A to 3200A
Copperwork must be supported within 200 mm of breaker
connections-busbars or cables. All connections to be tightened to 50Nm.
to door
Center line of
operating panel
Center line of
operating panel
50 Disconnected
35 Test
275 Fully withdrawn
Connected
Ventilation
Minimum clearance to cassette side
Copperwork must be supported within 200 mm of breaker
connections-busbars or cables. All connections to be tightened to 50Nm.
to door
Center line of
operating panel
Center line of
operating panel
50 Disconnected
35 Test
275 Fully withdrawn
Connected
Ventilation
Minimum clearance to cassette side
To Next Page
Loading...
