C.10
Dimensional drawings
A
B
C
X
M-PACT Plus
Rear access connection
Withdrawable pattern
Type S, N, H - 3 pole - Frame size 2, ln=4000A
Type S, N, H - 4 pole - Frame size 2, ln=4000A
Must not be removed
or fitted horizontally
Center line of
operating panel
Center line of
operating panel
50 Disconnected
35 Test
275 Fully withdrawn
Connected
to door
Ventilation
Minimum clearance to cassette side
Copperwork must be supported within 200 mm of breaker
connections-busbars or cables. All connections to be tightened to 50Nm.
Must not be removed
or fitted horizontally
Center line of
operating panel
Center line of
operating panel
50 Disconnected
35 Test
275 Fully withdrawn
Connected
to door
Ventilation
Minimum clearance to cassette side
Copperwork must be supported within 200 mm of breaker
connections-busbars or cables. All connections to be tightened to 50Nm.
To Next Page
Loading...
