® 2014 General Electric Company. All rights reserved. Masoneilan 12400 Series Transmitter/Controller Instruction Manual | 37
7.6.2. T
EMPERATURE COMPENSATION SETTING
Through ValVue suite software, the temperature compensation parameters can be set on the Advanced Setup menu.
a. On the Advanced Setup tab, click on Database.
b. Click on the arrow of the drop down list, located at the right of the Torque Tube Matl.
c. Select the materials related to the torque tube and housing sub-assembly: Inconel/Carbon Steel, Inconel/St. Steel, St.
Steel/St. St., Monel/Carbon Steel, etc.
In case of No Torque Tube setting, Inconel/Carbon Steel temperature compensation is applied by default.
e. Validate by clicking on Apply.
To Next Page
Loading...
