CHAPTER 4: INTERFACES
G500 SUBSTATION GATEWAY INSTRUCTION MANUAL GE INFORMATION 53
Ethernet Ports
There are six SFP slots available for Ethernet Interfaces at the rear of the G500 unit. Into
each slot an SFP module can be inserted.
For corresponding SFP modules and order codes See “G500 external Accessories” on
page 53.
Inserting an SFP module selects the appropriate transmitter protocol for the
corresponding switch port.
G500 external
Accessories
The following SFP modules are supported by G500:
580-3784 SFP Module 100BASE-FX LC TRANSCEIVER
OPTICAL
AVAGO HFBR-57E0APZ
FINISAR FTLF1217P2BTL
580-3785 SFP Module 1000BASE-SX LC TRANSCEIVER
OP
TICAL
AVAGO AFCT-5715ALZ
FINISAR FTLF8519P3BTL
580-3786 SFP Module 100/1000BASE-T RJ45
TRANSCEI
VER COPPER
FINISAR FCLF8522P2BTL
FOXCONN ABCU-5730ARZ
FOXCONN ABCU-5731ARZ
General cable
requirements
The cables required to make physical connections to the G500 are as follows:
100/1000Base-T UTP (Unshielded Twisted Pair) – CAT 5
or better
RJ45
100BASE-FX Fiber optic cable multimode LC
1000BASE-SX Fiber optic cable multimode LC
Item
Description Manufacturer Mfg Part number
Media Designation Cable Connector
Twisted Pair Ethernet
Fiber optic
Fiber optic
To Next Page
Loading...
