GE Multilin GEK-113000T - Page 244

GEK-113000T F650 Digital Bay Controller C-19
APPENDIX C C.1 FACTORY DEFAULT SETTINGS
C
SETPOINT > INPUTS/OUTPUTS > CONTACT I/O >
BOARD F > BOARD G >BOARD H>BOARD J
SETTING DESCRIPTION NAME DEFAULT VALUE STEP RANGE
USER
VALUE
I/O board type (available only for CIO
modules)
I/O Board Type_X NONE N/A [NONE,
16 INP + 8OUT,
8 INP + 8OUT + SUPV
32 INP
16 INP + 8 ANA]
Input activation voltage threshold
Group A
Voltage Threshold
A_X
80 1 V [10 : 230]
Input activation voltage threshold
Group B
Voltage Threshold
B_X
80 1 V [10 : 230]
Input activation voltage threshold
Group C
Voltage Threshold
C_X
80 1 V [10 : 230]
Input activation voltage threshold
Group D
Voltage Threshold
D_X
80 1 V [10 : 230]
Debounce time for Group A Debounce Time A_X 15 1 ms [1 : 50]
Debounce time for Group B Debounce Time B_X 15 1 ms [1 : 50]
Debounce time for Group C Debounce Time C_X 15 1 ms [1 : 50]
Debounce time for Group D Debounce Time D_X 15 1 ms [1 : 50]
Input type Input Type_X_CCY
(CCY)
POSITIVE N/A [POSITIVE-EDGE,
NEGATIVE-EDGE,
POSITIVE,
NEGATIVE]
Input signal time delay Delay Input
Time_X_CCY (CCY)
0 1 ms [0 : 60000]
Output logic type Output Logic_X_0Z POSITIVE N/A [POSITIVE,
NEGATIVE]
Output type Output Type_X_0Z NORMAL N/A [NORMAL,
PULSE,
LATCH]
Output pulse length Pulse Output
Time_X_0Z
10000 1 ms [0 : 60000]
Analog Inputs Range Range_X_0Z NONE N/A [NONE,
-1 to 0mA,
0 to 1 mA,
-1 to 1 mA,
0 to 5 mA,
0 to 10 mA]
Minimum Value Min_Value_X_0Z 0.00 0.01 [ -9999.99 : 9999.99]
Maximum Value Max_Value_
X_0Z 0.0
0 0.01 [ -9999.99 : 9999.99]
Snapshot event generation Snapshot Events ENABLED N/A [DISABLED – ENABLED]