3-22 F650 Digital Bay Controller GEK-113000T
3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
3
3.1.8.7 LOGIC CONFIGURATION
This logic configuration allows creating more complex configurations, using the graphical PLC, than using the tables from
Relay Configuration. For file management detailed information go to section 3.1.5.
File description:
*.pep: Header for Logic project: PLC project file containing the necessary information relative to the relay model, logic
libraries included in the project (*.lib), graphic file name (*.aut), etc.
*.aut: PLC Project file containing all the drawings used by the logic, required by 650 relay based on IEC 61131-3
standard. Functional block diagram (FDB).
*.lib: User programmable logic objects: Library file to be included as an object in a PLC project. Logic packages that
can be stored into libraries and be distributed in different PLC projects.
3.1.8.8 CLOCK
This menu allows to update the date and time of the relay, either synchronizing them with the PC clock, or entering the
information manually.
Figure 3–11: CLOCK
To Next Page
Loading...
