Chapter 2: Safety and Regulatory
Optima XR220amx X-Ray System 54400222-1EN Rev 1 DRAFT 11092010 2-12
Operator Manual © 2010 General Electric Company. All rights reserved.
Symbols
This section explains the symbols used on this system and in its accompanying documents.
Special Notices
Table 2-2 Special notices
Symbol Description
Dangerous voltage. This indicates an avoidable, dangerous, high voltage hazard.
This symbol on the equipment indicates the operating instructions should be
consulted to ensure safe operation.
Hand crushing hazard. This symbol indicates that serious injury to the hand may
occur.
Follow operating instructions. This symbol directs you to consult this manual for more
information.
No stepping or standing on unit. The component on which the symbol appears
cannot support the weight of a person. Damage to equipment or injury may occur if
the unit is stepped or stood upon.
Maximum load. This symbol indicates that the component has a maximum weight
limit. Damage to equipment or injury may occur if the maximum weight is exceeded.
Operating temperature. This symbol indicates that the component must be within a
minimum and maximum temperature range in order to operate. Damage to
equipment may occur if equipment is used at temperatures outside of the specified
range.
DRAFT REVIEW COPY
CTRL+SHIFT+F to search using Search Index (faster)
To Next Page
Loading...
Need help?
General
