Appendix A: Login Administration
Optima XR220amx X-Ray System 54400222-1EN Rev 1 DRAFT 11092010 A-8
Operator Manual © 2010 General Electric Company. All rights reserved.
Add a Local User
Once a user is added, it is automatically highlighted in the Local Users list box on the left-hand site, and it
is 'in context'. Once a user is in context, all information and buttons in the center panel (i.e. Username,
Full Name, Roles, Change Name, Change Password, Remove User, Groups list box, Add To Groups Button,
and Remove From Groups button) refer to that user.
1. Press [Add Local User].
x When this button is pressed a popup panel is displayed.
2. Enter the new User ID (which must be unique).
3. Enter a Full Name.
4. Enter a Password.
5. Enter the Confirmed Password.
x If any errors are encountered, you will receive an error messagebox. If you receive the error mes-
sagebox, changes were not committed to the database, and you can correct your errors and try
again. Possible errors that can be encountered when adding a user are:
– User ID already exists in the local user database (Choose a different unique username)
– Password does not meet the minimum length requirements (Choose a longer password)
– Password and Confirm Password box do not match (Make sure the passwords match)
6. Press [Add User].
Figure A-8 Add User Screen
DRAFT REVIEW COPY
CTRL+SHIFT+F to search using Search Index (faster)
To Next Page
Loading...
Need help?
General
