Appendix A: Login Administration
Optima XR220amx X-Ray System 54400222-1EN Rev 1 DRAFT 11092010 A-7
Operator Manual © 2010 General Electric Company. All rights reserved.
x Apply Configuration - Use the Apply Configuration button to save changes.
x Restore Configuration - Use this button to undo any changes that have not been saved yet. If there
are any errors, you will get a popup box describing the error. If it is successful, you will see a green
label appear with confirmation information.
Note: Users can become locked in one of two ways.
- The user enters too many incorrect passwords. In this case, the user will be locked out for a
certain amount of time, even with a correct password. Once the time has elapsed, the user can
attempt a login again. An administrator can unlock this user before the lock duration time has
elapsed by un checking Locked under the Local User tab when a user is selected.
- The administrator forcefully locks the user account. In this case, the lock duration does not
apply to a user who was forcefully locked by and administrator. They are locked until the
administration unlocks them.
3. Press [Apply Configurations].
DRAFT REVIEW COPY
CTRL+SHIFT+F to search using Search Index (faster)
To Next Page
Loading...
Need help?
General
