1 CHAPTER OVERVIEW
This chapter consists of the following sections:
1
Chapter Overview
2 Protection Parameter Settings
2.1 System Data
2.2 CB CONTROL Settings
2.3 DATE AND TIME Settings
2.4 CONFIGURATION Settings
2.5 TRANS. RATIOS Settings
2.6 RECORD CONTROL Settings
2.7 COMMUNICATION Settings
2.8 IO CONFIGURATION Settings
2.9 O/P RELAY CONFIG Settings
2.10 DISTURBANCE RECORD Settings
2.11 COMMISSION TEST Settings
2.12 GROUP Settings
2.12.1 SYSTEM CONFIG SETTINGS
2.12.2 OVERCURRENT Settings
2.12.2.1 I>1 Function
2.12.2.2 I>2 Function
2.12.2.3 I>3 Function
2.12.3 EARTH FAULT 1 (Measured)
2.12.3.1 IN1>1 Function
2.12.3.2 IN1>1 Function- Sensitive Earth Fault (ordering option)
2.12.3.3 IN1>2 Function
2.12.3.4 IN1>2 Function- Sensitive Earth Fault (ordering option)
2.12.3.5 IN1>3 Function
2.12.3.6 IN1>3 Function- Sensitive Earth Fault (ordering option)
2.12.4 EARTH FAULT 2 (Derived)
2.12.4.1 IN2>1 Function
2.12.4.2 IN2>2 Function
2.12.4.3 IN2>3 Function
2.12.5 THERMAL OVERLOAD Settings
2.12.6 Loss of Load Settings
2.12.7 NEG SEQUENCE O/C Settings
2.12.7.1 I2>1 Function
2.12.7.2 I2>2 Function
2.12.7.3 I2>3 Function
2.12.8 CB FAIL Settings
2.12.9 STALL DETECTION
2.12.10 LIMIT NB STARTS
2.12.11 VIEW RECORDS
To Next Page
Loading...
Need help?
General
