GE P50 Agile P253 User Manual

9 SCADA Communications
P50 Agile P253
9-18
P253/EN M/C
Timeouts while waiting for:
Data Link Confirm: None Fixed at 100ms Variable Configurable
Complete Appl. Fragment: None  Fixed at _______ Variable Configurable
Application Confirm:  None Fixed at 1s Variable Configurable
Complete Appl. Response: None  Fixed at _______ Variable  Configurable
Others:
Binary Input change scanning period: 2ms
Analog Input change scanning period: 1s
Sends/Executes Control Operations:
WRITE Binary Outputs  Never  Always  Sometimes  Configurable
SELECT/OPERATE  Never  Always  Sometimes  Configurable
DIRECT OPERATE  Never  Always  Sometimes  Configurable
DIRECT OPERATE - NO ACK  Never  Always  Sometimes  Configurable
Count > 1  Never  Always  Sometimes  Configurable
Pulse On  Never  Always  Sometimes  Configurable
Pulse Off  Never  Always  Sometimes  Configurable
Latch On  Never  Always  Sometimes  Configurable
Latch Off  Never  Always  Sometimes  Configurable
Queue  Never  Always  Sometimes  Configurable
Clear Queue  Never  Always  Sometimes  Configurable
Reports Binary Input Change Events when
no specific variation requested:
 Never
 Only time-tagged
 Only non-time-tagged
 Configurable
Reports time-tagged Binary Input Change
Events when no specific variation requested:
 Never
 Binary Input Change With Time
 Binary Input Change With Relative Time
 Configurable (attach explanation)

GE P50 Agile P253 Specifications

General

Brand	GE
Model	P50 Agile P253
Category	Relays
Language	English