GE P50 Agile P253 - Page 45

P50 Agile P253
5 Configuration
P253/EN M/C
5-5
2.4.22 Group 1- Thermal Overload Submenu
2.4.22.1 View / Edit Settings (If setting is disabled)
2.4.22.2 View / Edit Settings (If setting is disabled)
2.4.22.3 View / Edit Settings (If setting is enabled)
2.4.23 Group 1- Loss of Load Submenu
2.4.23.1 View / Edit Settings (If setting is disabled)
2.4.23.2 View / Edit Settings (If the setting is enabled)
2.4.24 Group 1- CB Fail Submenu
2.4.24.1 View / Edit Settings (If setting is disabled)
2.4.24.2 View / Edit Settings (If setting is enabled)
2.4.25 Group 1- Stall Detection Submenu
2.4.25.1 View / Edit Settings (If setting is disabled)
2.4.25.2 View / Edit Settings (If setting is enabled)
2.4.26 Group 1- Limit Nb Starts Submenu
2.4.26.1 View / Edit Settings (If setting is disabled)
2.4.26.2 View / Edit Settings (If setting is enabled)
2.4.27 Group 2 Menu
2.4.27.1 View / Edit Settings