GE P50 Agile P253 - Page 54

5 Configuration
P50 Agile P253
5-14
P253/EN M/C
I>2:
IN1>2: IN2>2: I2>2:
This window displays trip flag of stage 2: O/C, E/F-1 and E/F-2, Neg
Sequence O/C, Lock Rotor, Stall trip.
Note: This window is seen when relay operates for respective protection
function.
I>3:
IN1>3: IN2>3: I2>3:
This window displays trip flag of stage 3: O/C, E/F-1 and E/F-2, Neg
Sequence O/C, Prolong Start.
Note: This window is seen when relay operates for respective protection
function.
S1 S3 S5 CBF
S2 S4 S6 EXT TR
This window displays status flag (S1 – Opto Input 1, S2 – Opto Input 2,
S3 – Opto Input 3, S4 – Opto Input 4, S5 – Opto Input 5, and S6 – Opto
Input 6, CBF – CB Fail, EXT TR – External Trip)
Note: This window is seen when status flag operates
ia = 0.00 A
ib = 0.00 A
This window displays secondary fault current values.
ic = 0.00 A
in1= 0.00 A
This window displays secondary fault current values.
in2 = 0.00 A
i2 = 0.00 A
This window displays secondary fault current values.
i1 = 0.00 A
i0 =0.00
This window displays secondary fault current values.
Thermal State
0%
This window displays Thermal State.
Trip Counter
0
This window displays Trip counter.
Trip Timing (Sec)
0.000
This window displays Trip time.