What to do if the keypad does not work on my GE PDW9200 Dishwasher?
If the keypad on your GE Dishwasher isn't working, you can try the following steps: First, disconnect power to the dishwasher. Then, access the control circuit board and remove and reseat the keypad connector. You might also try running a factory calibration. If these steps don't work, the keypad or the control might need to be replaced.
How to fix a GE Dishwasher when the 3-digit display does not work?
If the 3-digit display on your GE dishwasher is not working, try these steps: Disconnect power to the dishwasher. Access the control circuit board, then remove and reseat the 3-digit display connector. If the issue persists, consider replacing the control circuit board or the 3-digit display.
General| Brand | GE |
|---|---|
| Model | PDW9200 Series |
| Category | Dishwasher |
| Language | English |
Explains status lights indicating dishwasher operation and potential malfunctions.
Introduces wash cycle and enhancement selection options for the dishwasher.
Allows delaying the start of a wash cycle up to 24 hours for user convenience.
Diagram identifying components inside the dishwasher cabinet.
Diagram showing components located behind the removed outer door panel.
Steps to diagnose and resolve problems with the 3-digit display.
Troubleshooting steps for unresponsive or incorrect keypad operation.
To Next Page
