GE PFDN445 - Connecting a Gas Dryer; Tools You will Need; For Your Safety; Materials You will Need

r10″ Adjustable
wrenches (2)
r8″ Pipe wrench
rSlip-joint pliers
rFlat-blade screwdriver
rLevel
=BC0;;0C8>==BCAD2C8>=B
)$$!(.$*,!!#
$##)#('.'B:8?5>A4;42CA823AH4AB
$'.$*'().
,'##
Before beginning the installation, turn off
the circuit breaker(s) or remove the dryer’s circuit
fuse(s) at the electrical box. Be sure the dryer cord
is unplugged from the wall.
Turn the dryer’s gas shut-off valve in the supply
line to the OFF position.
Disconnect and discard old flexible gas connector
and ducting material.
Shut-off
Valve
")'!(.$*,!!#
r4″ dia. metal elbow
rPipe compound
rFlexible gas line
connector
rDuct clamps (2) or
Spring clamps (2)
rSafety glasses
r4″ dia. metal duct
(recommended)
r4″ dia., UL-listed flexible
metal duct (if needed)
rGloves
rSoap solution for
leak detection
rExhaust hood
rDuct tape
