GE Simon XTi User Manual

Condition Description
Sensor tampered
This condition occurs when a sensor is physically tampered with, for
example, that the cover is taken off one of the sensors. If the system
is armed, an alarm will occur. Sensor icons change to red (see Table 4
on page 5),
icon appears, and the red alarm pop-up will appear if
the system is armed. Trouble beeps will start. Correct the problem by
resetting the sensor. If this condition continues, call your security
system dealer.
RF jam detected The panel receiver may be experiencing some interference. The
system will call to notify the central monitoring station about this
problem.
Clearing status
Some types of status conditions, such as alarm history, must be
cleared manually. To clear system status, press CLEAR next to Panel
Status in the STATUS & SETTINGS menu. If the trouble condition was a
low system battery, perform a sensor test. The
should disappear
if all trouble conditions have been corrected.
20
Simon XTi User Manual

GE Simon XTi Specifications

General

Brand	GE
Model	Simon XTi
Category	Security System
Language	English