GE TRANSFIX DGA 500 - Further System Specifications; Figure 6-9: Measurement Data

MA-014 - TRANSFIX DGA 500 User Guide – Rev 1.1 13-Oct-15 Page 15 of 28
6.1.2.3 Measurement Data
Use the black scroll buttons at any time to page through the notices and see the
measurement data. For example, data for the main tank is shown in
Figure 6—9. The product can also be configured to automatically page through the
results of the last analysis.
Figure 6—9: Measurement data
6.1.3 Further System Specifications
6.1.3.1 Communications Channels
The product has two serial communications channels. For example, default configuration
details are shown in Figure 6—10, such as the interface, protocol, baud rate, modbus
address and parity error-checking format.
MAIN
LAST MEASUREMENT
2015-04-02 12:48:10
MAIN
Hydrogen ?????.? ppm
Methane ?????.? ppm
CarbonMono ?????.? ppm
MAIN
Ethylene ?????.?ppm
Acetylene ?????.?ppm
TDCG ?????.?ppm
MAIN
Water ?????.?ppm
MAIN
NHC None
MAIN
Amb Temp - 0.1 °C
Oil Temp +38.3 °C
Oil Press +97.1 kPa
MAIN
AIN 1 -1.111xxx
MAIN
NEXT MEASUREMENT
2015-04-02 16:48
MAIN
LAST MEASUREMENT
2015-04-02 12:48:10
MAIN
Hydrogen ?????.? ppm
Methane ?????.? ppm
CarbonMono ?????.? ppm
MAIN
Ethylene ?????.?ppm
Acetylene ?????.?ppm
TDCG ?????.?ppm
MAIN
Water ?????.?ppm
MAIN
NHC None
MAIN
Amb Temp - 0.1 °C
Oil Temp +38.3 °C
Oil Press +97.1 kPa
MAIN
AIN 1 -1.111xxx
MAIN
NEXT MEASUREMENT
2015-04-02 16:48