4-16 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
4
IC200CHS022
Compact Box-Style I/O Carrier
Field Wiring Terminals
Each terminal accommodates one solid or stranded AWG #14 (avg. 2.1 mm
2
cross section) to AWG #22 (avg. 0.36 mm
2
cross section) wire, or two wires up
to AWG #18 (avg. 0.86 mm
2
cross section).
The carrier accommodates current levels up to 2 A per point or 8 A per each
power and ground, and a voltage range of up to 264 V AC. Voltage transients
up to 300 V AC will not damage the carrier.
Wiring Card Holder
The Compact I/O Carrier has a built-in card holder that hinges down over the
terminal wiring. The wiring card provided with the I/O module can be inserted in
the holder. During system operation, the card holder should be in the retracted
position.
Wiring Card in
Holder, Hinged
Over Terminals
To Next Page
Loading...
