Replacing covers and bumpers
Vivid E80/E90/E95 – Service Manual 8-9
GC091052 Rev. 3
Replacing covers and bumpers
Side covers replacement
Read and follow
Energy Control and Power Lockout for Vivid E80/E90/E95.
When servicing parts of the Ultrasound system where there is
exposure to voltage greater than 30 volts:
1. Follow LOCK OUT/TAG OUT procedures.
2. Turn off the breaker.
3. Unplug the Ultrasound system.
4. Maintain control of the Ultrasound system power plug.
5. Wait at least 30 seconds for capacitors to discharge as
there are no test points to verify isolation.
Ultrasound System components may be energized.
To Next Page
Loading...
Need help?
General
