D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
8-148 Section 8-6 - Mechanical Platform Components - Replacement Procedures
PRELIMINARY
8-6-4-4 Touch Screen Chassis Removal Procedure
1.) Remove the Touch Screen:
2) Unscrew and remove the two securing screws fastening the chassis to the top of the keyboard
assembly - shown in Figure 8-179.
3.) Cut the cable securing tie-wraps.
4.) Remove the Operator Panel Keyboard Assembly:
5.) From the bottom of the keyboard assembly, unscrew the four screws shown in Figure 8-180.
6.) From the top of the keyboard assembly, carefully slide the Touch Screen Chassis Panel out from
beneath the two screw plastic flanges (shown in Figure 8-179) and lift the chassis upwards to
release it from its location.
• Touch Screen Removal Procedure on page 8 - 38
Figure 8-179 Removing Securing Screws
• Operator Panel Keyboard Assembly Removal Procedure on page 8 - 44
Figure 8-180 Four Screws Securing the Touch Screen Chassis
To Next Page
Loading...
