Initial use
Vscan Air – User Manual 3-79
Direction GP092020-1EN Rev 18
Multi Vscan Air probes detection
When a Vscan Air CL probe is not detected near the display
device, the search is on continuously.
When there are two Vscan Air CL devices (for example A and B)
in the vicinity of the display device, the closest one is detected. If
you wish to use Vscan Air CL A, turn off Vscan Air CL B or put it
far away from the display device. Press the power button on
Vscan Air CL probe to connect to the Vscan Air app.
Preview mode
The Vscan Air App functions in a non-medical Preview mode
until activated. The Vscan Air CL probe has no ability to connect
to Vscan Air App while in Preview mode. We can explore all the
main functionality of the app, but some functions are disabled. If
saving an image or video, there will be an “Example image”
watermark on image.
You can activate Preview mode from Start Screen, or from
Configurations in Menu after having activated the Vscan Air
App.
1. Activate Preview mode via Start Screen.
• Selec
t Preview
2. Activate Preview mode via activated Vscan Air App.
•
Go to Configuration in Menu and turn on
Preview
Mo
de.
To exit Preview mode:
•
Press on the banner at the bottom of the screen.
•
Go to Configuration in Menu and turn off Preview Mode.
To Next Page
Loading...
Need help?
General
