GE Vscan Air User Manual

Preparing Vscan Air CL for Use
3-80 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Precautions
NOTE: Scanning does not start if the Vscan Air CL probe is not
connected to a Vscan Air app.
NOTE: The Vscan Air probe will not be able to connect to the Vscan Air
App if the Android or iOS mobile device is in 'Flight mode'.
NOTE: If using ‘Hotspot’, Wi-Fi will not be available for connecting to
Vscan Air CL.
NOTE: Scanning stops if the Vscan Air App is sent to the background
on the display device.
NOTE: Scanning stops within 10 seconds if the Wi-Fi link to the Vscan
Air CL probe is lost.
NOTE: Scanning never starts when there is a critical error (e.g., battery
critically low) on the Vscan Air CL probe.
NOTE: Scanning stops within 10 seconds when there is a critical error
(e.g. battery critically low) on the Vscan Air CL probe.
NOTE: The display device shall be encrypted and user authentication
enabled (password or PIN with sufficient complexity) before the
user can store or access any already stored images or videos.
CAUTION
If the display device storage space is less than 700Mb, an error
message is displayed.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices