Configuration
Vscan Air – User Manual 4-7
Direction GP092020-1EN Rev 18
Configuration (continued)
5. Auto Freeze Time (see ‘Configuration’ on page 4-3) -
•
Press Auto Freeze Time
•
Tap on the desired value to set the auto freeze ti
me.
Th
is sets the time after which the system enters Fr
eeze
mo
de when not in use.
Figure 4-6. Auto freeze time
NOTE: Configure the display device with an adequate
'screen-save' timeout and ‘auto freeze’ timeout in the
case of performing guidance procedures where there is
no user interface interaction over the course of the
procedure.