GE Vscan Air User Manual

Using Vscan Air CL
5-10 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Patient examination
Creating a new exam
A new exam can be created in two ways:
1. Automatically - A new exam will be created every time the
Vscan Air CL pairs successfully with the Vscan Air app and
also every time the Vscan Air App is started.
2. Manually - A new exam can be created manually at any time
by selecting new exam from the right panel.
• Swipe from right to left or tap the 'icon' on the right upper
corner to bring out the right panel.
• Press New Exam on the bottom right corner of the
screen.
Figure 5-6. New exam

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices