GE Vscan Air User Manual

Using Vscan Air CL
5-32 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Protected Health Information
Protected Health Information is the data that helps in identifying
a patient. It is possible to either manually enter patient details/
patient data in the Vscan Air application or assign patient/Study
information from a scheduled exam retrieved from the Modality
Worklist Server.
Assign Patient data manually to the current exam
To assign patient details manually to the current exam in Vscan
Air application, follow the procedure below.
1. Swipe from right to left.
OR
Press Patient icon on the top right corner.
Figure 5-24. Patient Icon
NOTE: Patient data can be assigned to an individual exam only.
The Patient data cannot be assigned to more than one
exam simultaneously.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices