Using Vscan Air CL
5-52 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Taking measurements (continued)
2. Drag to position the calipers to obtain the desired
measurement.
3. To store the image with a measurement, press store.
NOTE: Only a single ellipse measurement can be performed on the
displayed image.
To delete an ellipse measurement:
1. Select the measurement.
2. Press the ‘Bin’ icon to delete the selected measurement.
To exit the Measure mode select the 'Measure‘ icon or press
‘Freeze’ icon or switch frame with Video buffer slider.
To Next Page
Loading...
