GE Vscan Air User Manual

Vscan Air Maintenance
6-8 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Compatibility with trophon devices
There are different methods of disinfecting the Vscan Air probe
based on its clinical use. When High-Level Disinfection is
required, utilizing trophon EPR or trophon2 devices is one
disinfection method. A trophon Wireless Ultrasound Probe
Holder is required to hold the Vscan Air probe in the trophon
chamber. Refer to the manufacturer’s instructions for use when
using the trophon EPR or trophon2 devices.
GE offers this holder as an accessory to the Vscan Air. GE
Healthcare has not validated the effectiveness of the disinfection
process utilizing trophon devices. For questions relating to
efficacy testing please visit Nanosonics at www.nanosonics.com
Special Label Designations, Warnings and Precautions
Never use thinner, benzene, abrasive cleaners, or other strong
solvents, as these may cause damage to the Vscan Air CL.
Special accessories
Special accessories are not applicable.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices