GE Vscan Air User Manual

Preparing Vscan Air CL for Use
3-6 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
How to charge the Vscan Air CL (continued)
6. The Vscan Air CL lights up and starts charging.
7. Vscan Air CL gets wirelessly charged with the Anke
r
PowerWave charging pad. The LEDs will light in an orange/
red toned yellow color Whenever charge is less th
an 8%
a
nd probe needs a higher charge level to allow starting
.
Y
ellow light on both LEDs indicates the Vscan Air CL
is
cha
rging with capacity in the range 8-90%. Green light on
both LEDs indicates the Vscan Air CL is fully
charged
9
0-100% (see ‘Vscan Air CL LED indication’ on page 3-20).

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices