Hint!
Watch pressure and temperature!
–
the supporting, hanging and storage facilities are
misused.
–
control and regulation units including control sys-
tem software are tampered with.
–
the driving power generated by the motor is used
for purposes other than the operation of the
respective compressors and pumps.
1.6 CE mark
By affixing the CE mark, the manufacturer confirms
the conformity of the product with the applicable EC
Directives and compliance with the principle require-
ments stipulated within them.
fig.1: CE mark
The CE mark is affixed to the nameplate.
The CE mark for products from GEA Refrigeration
Germany GmbH is provided as defined in the Pres-
sure Equipment Directive, i.e. pressure equipment is
placed on the market with the required equipment
parts with safety function. This complete assembly is
subject to the Pressure Equipment Directive.
Operating Manual | GEA Grasso M-Series
Screw Compressor Packages
Basics
GEA Refrigeration Germany GmbH | P_261511_1 | Generated 01.04.2015 15
To Next Page
Loading...
Need help?
General
