7.5.7 Labels of the pressure gauge
(information plate)
fig.14: Labels of the pressure gauge
1 Description of the pressure gauge measuring
point
The description of the pressure gauge measuring
point is attached directly underneath the pressure
gauge. The gauge board can be arranged horizon-
tally as well as vertically.
7.5.8 Labeling of the control / control
cabinet
(information plate)
•
Label on the rear side of the control unit of the
control system (visible after opening the switch-
ing cabinet):
–
Project name
–
Make number of the package/chiller
–
MPI address
•
Label on the inside of the switching cabinet:
–
Test verification for the control system
fig.15: Test verification for the control system
Description of Design and Function Operating Manual | GEA Grasso M-Series
Screw Compressor Packages
36 GEA Refrigeration Germany GmbH | P_261511_1 | Generated 01.04.2015