GEA HG7 Series User Manual

30
D
GB
F
E
09706-09.2013-DGbFEI
10| Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 00
for using the compressors within the European Union
(in accordance with Low Voltage Directive 2006/95/EC)
We hereby declare that the following refrigerating compressors
Product designation: HG7
comply with the Low Voltage Directive 2006/95/EC.
Applied harmonised standard:
EN 60034-1:2010
EN 60204-1:2006
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(in accordance with Machinery Directive 2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
72636 Frickenhausen, Tel.: 07022/9454-0
hereby declares that the refrigerating compressor HG7complieswiththebasicrequirementsof
Appendix II 1B of the Machinery Directive 2006/42/EC.
Applied harmonised standard:
EN 12693:2008 and the corresponding standards referenced
A partly completed machine may only be put into operation when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulations of the Machinery Directive (2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequiredby
individualstatesforpartlycompletedmachineryonrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
in accordance with Appendix VII Part B.
Person responsible for documentation is: Wolfgang Sandkötter, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 01.11.2011 ppa. Wolfgang Sandkötter,
ChiefDevelopmentOfcer

GEA HG7 Series Specifications

General

Brand	GEA
Model	HG7 Series
Category	Air Compressor
Language	English