GEA NOVALOBE 30 - Page 5

LAYOUT INFORMATION
Bullet points and numbered list characters
Bullet points are used to separate logical contents within a section:
•
Bullet point 1
Types of bullet point 1.
•
Bullet point 2
Types of bullet point 2.
Numbered list characters are used to separate enumerations within a
descriptive text:
Descriptive text with consecutive numbering:
–
Numbered list point 1
–
Numbered list point 2
Handling instructions
Handling instructions require you to do something. Several consecutive steps
result in a handling sequence that should be run in the specified order. The
handling sequence can be divided into separate steps.
Handling sequence
1.
Handling sequence step 1
–
step 1,
–
step 2,
–
step 3.
2.
Handling sequence step 2
The subsequent handling sequence is the expected result:
®
Result of the handling sequence.
Individual handling steps
Individual handling steps are marked thus:
–
Individual work steps
BA.280.YYY.001.GB_4
21.02.2022 5