To Next PageTo Next Page
Need help?Do you have a question about the Geberit HDPE and is the answer not in the manual?
General| Material | High-density polyethylene (HDPE) |
|---|---|
| Color | Black |
| Application | Drainage systems |
| Temperature Resistance | Up to 100°C |
| Diameter Range | 32mm to 315mm |
| Connection Method | Butt welding, electrofusion, mechanical fittings |
| Chemical Resistance | Resistant to chemicals |
| Standards | EN 1519 |
| Temperature Range | -40°C to +60°C |
| Pressure Rating | Not intended for pressure applications |
Introduction to Geberit HDPE drainage systems and their properties.
Introduction to Geberit Silent-db20 drainage system for soundproofing.
Details on material properties, durability, and advantages of Geberit drainage.
Technical specifications, dimensions, and article numbers for Geberit HDPE pipes.
Technical specifications, dimensions, and article numbers for Geberit Silent-db20 pipes.
Explains the importance of pH in chemical resistance for drainage materials.
Principles and methods for minimising sound transmission from drainage systems.
Details on specific products like Geberit Isol Acoustic Wrap for sound insulation.
Detailed explanation of butt welding process for Geberit HDPE pipes.
Step-by-step guide for manual butt welding of pipes.
Instructions for butt welding using automated machines.
Explanation of electrofusion coupling for creating leak-free joints.
Specific procedure for electrofusion coupling of smaller diameter pipes.
Specific procedure for electrofusion coupling of larger diameter pipes.
How to convert an electrofusion coupling into a slip coupling.
Description of ring-seal sockets for easy assembly and demountable connections.
Use of expansion sockets to manage thermal movement in HDPE systems.
Details on flanged joints for low pressure, demountable connections.
Information on screw-threaded joints for demountable connections and material transitions.
Use of flange bushing for screw-threaded joints in specific applications.
Specific jointing methods suitable for Geberit Silent-db20 systems.
Details on expansion fittings for the Silent-db20 system.
Methods and adapters for connecting Geberit systems to different materials.
Guidelines on spacing anchor and guide brackets for pipe support.
Purpose and application of guide brackets in supporting pipes.
Specific bracketry requirements for the Silent-db20 system for acoustic performance.
Strategies for managing thermal expansion and contraction in above-ground systems.
Using expansion sockets to manage thermal movement in HDPE systems.
How to use deflection legs to accommodate thermal movement in pipes.
Methods for securing pipes to prevent movement, including anchor bracket requirements.
Details on the Geberit Pluvia rail system for suspended horizontal pipework.
Methods for ensuring watertight seals at pipe passages through walls/ceilings.
Information on fire protection sleeves and collars for pipe penetrations.
Introduction to the Geberit Sovent fitting for single stack drainage systems.
Key considerations and rules for planning Geberit Sovent drainage systems.
Formula and requirements for sizing Sovent stacks based on load.
Installation instructions and prerequisites for Geberit Sovent fittings.
General information on Geberit air admittance valves for drainage ventilation.
Details on the GRB90 model of air admittance valve and its applications.
Details on the GBR50 model of air admittance valve and its connection possibilities.
General overview of Geberit HDPE for underground drainage applications.
Guidelines for trench preparation, bedding, and filling for buried pipes.
Managing expansion/thermal movement in underground drainage systems using sockets.
Method for installing pipes rigidly within concrete structures.
Guidance on pipe installations passing through building walls, managing settling.
Methods for connecting Geberit HDPE pipes to manholes.
