34
in.xe™
Parameter Display Options Description
Output 1A
--,1H,1L,2H,2L,3H,3L,4H,
4L,P5,BL,CP,O3,L2,H
Accessory connected to the relay of Output 1A
Output 1B
--,1H,1L,2H,2L,3H,3L,4H,
4L,P5,BL,CP,O3,L2,H
Accessory connected to the relay of Output 1B
Output 2
--,1H,1L,2H,2L,3H,3L,4H,
4L,P5,BL,CP,O3,L2,H
Accessory connected to the relay of Output 2A
Output 3
--,1H,1L,2H,2L,3H,3L,4H,
4L,P5,BL,CP,O3,L2,H
Accessory connected to the relay of Output 3A
Output 4
--,1H,1L,2H,2L,3H,3L,4H,
4L,P5,BL,CP,O3,L2,H
Accessory connected to the relay of Output 4A
Output 5 --, H Accessory connected to the relay of Output 5A
Output Direct
Direct = --
CP on Direct = CP
Set to CP only if the circulation pump is connect on the Direct.
--
--
--
--
--
--
Table 3
--
programming the in.xe™
To Next Page
Loading...
Need help?
General
