Gecko waterlab - Warning


WARNING :
Before installing or connecting the unit, please read the following.
*
INSTALL THE IN.TOUCH -CO MODULE AT LEAST " ( CM) AWAY FROM ANY METAL PART OR ANY METAL FOIL.
* THE IN.TOUCH -CO MODULE SHOULD BE INSTALLED SUCH AS IT CAN BE RELOCATED UNDER THE SPA
IN ORDER TO OBTAIN OPTIMAL RECEPTION AFTER FINAL INSTALLATION OF THE SPA IN THE YARD.
* TO SATISFY FCC RF EXPOSURE REQUIREMENTS FOR MOBILE AND BASE STATION TRANSMISSION DEVICES,
A SEPARATION DISTANCE OF " ( CM) OR MORE SHOULD BE MAINTAINED BETWEEN THE IN.TOUCH 
MODULES AND PERSONS DURING OPERATION; TO ENSURE COMPLIANCE, OPERATION AT CLOSER THAN
THIS DISTANCE IS NOT RECOMMENDED.
* THE ANTENNAS USED FOR THESE MODULES MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION
WITH ANY OTHER ANTENNA OR TRANSMITTER.
* TO POWER THE IN.TOUCH -EN, USE THE POWER SUPPLY UNIT PROVIDED WITH THE IN.TOUCH -EN.
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISMANTLE THE UNIT. THERE ARE NO USER
SERVICEABLE PART INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
IMPORTANT SAFETY INSTRUCTION FOR YOUR OWN SAFETY PLEASE READ THE FOLLOWING IMPORTANT SAFETY
INSTRUCTION CAREFULLY BEFORE ATTEMPTING TO CONNECT THIS UNIT TO THE MAIN POWER SUPPLY.
THEY WILL ALSO ALLOW YOU TO GET THE BEST PERFORMANCE AND PROLONG THE LIFE OF THE UNIT.
LIABILITY DISCLAIMER
THE RECOMMENDATIONS PROVIDED BY THE GECKO WATERLAB ARE INTENDED FOR INFORMATIONAL PURPOSES
ONLY AND ARE BASED ON THE WATER SAMPLE DATA AT THE TIME OF ANALYSIS. IT IS THE RESPONSIBILITY OF
THE USER TO THOROUGHLY READ AND FOLLOW THE MANUFACTURER’S INSTRUCTIONS FOR ANY CHEMICALS
OR PRODUCTS BEFORE ADDING THEM TO THE SPA. THE GECKO WATERLAB CANNOT BE HELD LIABLE FOR
ANY DAMAGES OR ISSUES ARISING FROM IMPROPER USE OF CHEMICALS OR PRODUCTS, FAILURE TO FOLLOW
PRODUCT GUIDELINES, OR INACCURATE WATER TESTING RESULTS. ALWAYS CONSULT THE PRODUCT'S
GUIDELINES AND SEEK PROFESSIONAL ADVICE WHEN NECESSARY TO ENSURE THE SAFE AND PROPER
MAINTENANCE OF YOUR SPA.
* READ THESE INSTRUCTIONS.
* CLEAN ONLY WITH DRY CLOTH. BEWARE THE APPLICATION OF SOME PRODUCTS COMMONLY USED AGAINST
CORROSION (SUCH AS WD- FAMILY PRODUCTS) AS THEY COULD DAMAGE THE ENCLOSURE, DUE TO A
NEGATIVE CHEMICAL REACTION BETWEEN SOME INDUSTRIAL OILS AND ITS PLASTIC ENCLOSURE. ANY OTHER
MATERIALS WHICH MAY COME IN CONTACT WITH THE ENCLOSURE MUST BE CAREFULLY EVALUATED UNDER
END USE CONDITIONS FOR COMPATIBILITY.
* DO NOT INSTALL NEAR ANY HEAT SOURCES.
* ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.
* REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS REQUIRED WHEN THE APPARATUS
HAS BEEN DAMAGED IN ANY WAY, SUCH AS POWER-SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN
SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS, DOES NOT OPERATE NORMALLY, OR HAS BEEN
DROPPED
WARNINGS: Before installing or connecting the unit, please read the following
* DO NOT DISASSEMBLE OR ALTER THE APPARATUS
* DO NOT USE FOAM TO ISOLATE THE UNIT
* TURN POWER OFF BEFORE MODIFYING ANY CABLE CONNECTION IN THIS UNIT
* TURN POWER OFF BEFORE CLEANING OR SERVICING THIS UNIT
* PRODUCT MUST BE DISPOSED OF SEPARATELY FROM NORMAL HOUSEHOLD IN ACCORDANCE WITH LOCAL
WASTE DISPOSAL LEGISLATION
* DO NOT SERVICE THIS PRODUCT YOURSELF
* ANY DAMAGED CABLE MUST BE IMMEDIATELY REPLACED BY QUALIFIED PERSONNEL.
* THESE PRODUCTS MUST NOT BE INSTALLED IN PROXIMITY OF HIGHLY FLAMMABLE MATERIALS.
. Warning