Gecko waterlab - Compatibility Requirements


* IMPROPER WIRING MAY CAUSE DAMAGE TO THIS CONTROL SYSTEM. READ AND FOLLOW ALL WIRING
INSTRUCTIONS WHEN CONNECTING TO POWER SUPPLY.
* PRODUCT MUST BE DISPOSED OF SEPARATELY IN ACCORDANCE WITH LOCAL WASTE DISPOSAL LEGISLATION.
* THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL,
SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN
GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR
THEIR SAFETY.
* CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.
* MEANS FOR DISCONNECTION MUST BE INCORPORATED IN THE FIXED WIRING IN ACCORDANCE WITH
THE WIRING RULES.
* PARTS INCORPORATING ELECTRICAL COMPONENTS, EXCEPT REMOTE CONTROL DEVICES, MUST BE LOCATED
OR FIXED SO THAT THEY CANNOT FALL INTO THE BATH OR SPA.
* PARTS ARE TO BE INSTALLED IN THE CORRECT ZONE AND EQUIPOTENTIAL BONDING CARRIED-OUT
IN ACCORDANCE WITH THE WIRING RULES.
* CLEARANCE AND MINIMUM DISTANCE BETWEEN THE VARIOUS PARTS OF THE APPLIANCE AND
THE SURROUNDING STRUCTURE ARE NOT SPECIFIED AS LONG AS THEY ARE SUFFICIENT SO THAT
THE AMBIENT TEMPERATURE AROUND THE CONTROLLER DOES NOT EXCEED °
DISPOSAL OF THE PRODUCT
THE APPLIANCE (OR THE PRODUCT) MUST BE DISPOSED OF SEPARATELY IN ACCORDANCE
WITH THE LOCAL WASTE DISPOSAL LEGISLATION IN FORCE.
COMPATIBILITY REQUIREMENTS
in.touch  modules for FCC (North America) models ( MHz):
in.touch  modules for ETSI (Europe) models ( MHz):
Compatible spa packs: in.ye, in.yj and in.yt spa systems manufactured in or after .
in.touch  application:
Compatible with devices running: iOS . or higher Android . or higher
ROUTER AND INSTALLATION REQUIREMENTS
Any standard router with an available  Mbps (wired LAN) RJ port can be used. The router must also have
its Port
 open, which is normally a default setting. A -foot (. m) Ethernet cable is included.
The home transmitter will need a main supply (
V in North America, V in Europe) nearby to allow
connection of the transformer.
Gecko
®
, and their respective logos are Registered Trademarks of Gecko Alliance Group. in.touch 
TM
, in.xm
TM
,
in.xe
TM
, in.yt
TM
, in.ye
TM
, in.therm
TM
and their respective logos are Trademarks of Gecko Alliance Group.
All other product or company names that may be mentioned in this publication are tradenames, trademarks
or Registered Trademarks of their respective owners.